Diese Seite wurde mit Google Übersetzer übersetzt
Gerätespezifikationsbibliothek
Grundlegende Modellinformationen
-
Hersteller:American Augers
-
Modell:36-340 S
Hersteller anzeigen Modelle anzeigen
Zusätzliche Information
POWER TRAIN
Engine Type: DEUTZ 8F3L1011F diesel, air cooled with electric start
Rating: 57 HP (42.5 kW) @3000 RPM continuous duty
Torque: 119 fMb (161 Nm) @ 1800 RPM
Fuel Capacity: 10 U.S. gallons (38 L)
Clutch: Dry, spring applied, 11 inch (280 mm) diameter
Transmission: T-18 four-speed constant mesh
Ratios:
*1st gear - 6.32:1
*2nd gear - 3.09:1
*3rd gear - 1.69:1
*4th gear - 1.00:1
*Reverse - 7.44:1
Gearbox Ratio: 58.4:1
Auger Drive: Three-inch hex (76.2 mm)
Working Range: 12 to 36 inch (305 to 914 mm) casing diameter
TORQUE AND SPEED (MAX)
1st gear: 38,400 ft-lb (52,100 Nm), 8 RPM
2nd gear: 18,800 ft-lb (25,500 Nm), 17 RPM
3rd gear: 10,300 ft-lb (13,900 Nm), 30 RPM
4th gear: 6,100 ft-lb ( 8,200 Nm), 51 RPM
Reverse: 45,200 ft-lb (61,300 Nm), 7 RPM
WEIGHTS (APPROXIMATE)
Base unit, split machine: 4,800 lb (2,179 kg)
Power package, split machine: 2,400 lb (1,090 kg)
Casing pusher: 800 lb (363 kg)
Master track: 1,300 lb (590 kg)
Extension track: 1,100 lb (500 kg)
HYDRAULIC SYSTEM
Pressure: 4,000 PSI (27,850 kPa)
Thrust (max): 340,000 lb (1,512 kN)
Primary Pump: High/low speed gear pump
Output: 23 GPM (87 L/min)
Cylinders: Three (3) six-inch bore x 36-inch stroke (152.4 x 914.4 mm)
Suction Filter: 100 mesh screen in tank
Transmission Return Filter: 10-micron replaceable element
Engine Type: DEUTZ 8F3L1011F diesel, air cooled with electric start
Rating: 57 HP (42.5 kW) @3000 RPM continuous duty
Torque: 119 fMb (161 Nm) @ 1800 RPM
Fuel Capacity: 10 U.S. gallons (38 L)
Clutch: Dry, spring applied, 11 inch (280 mm) diameter
Transmission: T-18 four-speed constant mesh
Ratios:
*1st gear - 6.32:1
*2nd gear - 3.09:1
*3rd gear - 1.69:1
*4th gear - 1.00:1
*Reverse - 7.44:1
Gearbox Ratio: 58.4:1
Auger Drive: Three-inch hex (76.2 mm)
Working Range: 12 to 36 inch (305 to 914 mm) casing diameter
TORQUE AND SPEED (MAX)
1st gear: 38,400 ft-lb (52,100 Nm), 8 RPM
2nd gear: 18,800 ft-lb (25,500 Nm), 17 RPM
3rd gear: 10,300 ft-lb (13,900 Nm), 30 RPM
4th gear: 6,100 ft-lb ( 8,200 Nm), 51 RPM
Reverse: 45,200 ft-lb (61,300 Nm), 7 RPM
WEIGHTS (APPROXIMATE)
Base unit, split machine: 4,800 lb (2,179 kg)
Power package, split machine: 2,400 lb (1,090 kg)
Casing pusher: 800 lb (363 kg)
Master track: 1,300 lb (590 kg)
Extension track: 1,100 lb (500 kg)
HYDRAULIC SYSTEM
Pressure: 4,000 PSI (27,850 kPa)
Thrust (max): 340,000 lb (1,512 kN)
Primary Pump: High/low speed gear pump
Output: 23 GPM (87 L/min)
Cylinders: Three (3) six-inch bore x 36-inch stroke (152.4 x 914.4 mm)
Suction Filter: 100 mesh screen in tank
Transmission Return Filter: 10-micron replaceable element
Diese Information dient nur zu Informationszwecken. HDD Broker LLC kann die Richtigkeit oder Vollständigkeit dieser Informationen nicht garantieren. Diese Informationen können vom Hersteller geändert werden. Einige Spezifikationen können sich je nach Modelljahr unterscheiden.