Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Metrotech
  • Model:
    9800XT

View Manufacturers View Models

Additional Info

TRANSMITTER
-----------
Automatic Best Frequency Selection - Chooses the lowest frequency that provides reliable Receiver response in a typical 500 ft. locate.

Poor Conductor Alert - Warns the user that no frequency will produce a reliable Receiver response.

Automatic Impedance Matching - Automatically matches the Transmitter to the line impedance to provide maximum output in all situations.

3 Watt Output - High power output for low frequencies and long distance locating.

Simultaneous Frequency Output - Transmits several frequencies simultaneously to provide locate confirmation and selection flexibility.

Output Level Indicator - Provides information on actual signal transmitted on the conductor.

Loop Resistance Measurement - Provides information to confirm improvement in ground connection and identification of problem locate situations.

Optional Rechargeable Batteries - Provides money saving power supply for the full time professional user.

Safety Flag - Reduces repair costs from collision damage by increasing Transmitter
visibility.

Low Battery Alert Transmitted to Receiver - Alerts the user on the Receiver display that the Transmitter has only approximately 20 minutes of power remaining.

Improper Selection Alert - Warns the user that an improper Transmitter mode has been selected.

Inductive Antenna - Provides locating capability where utility access is not available.

Multiple Power Levels - Provides maximum flexibility for all locating jobs from high congestion to long distance tracing.

RECEIVER
--------
Distance Sensitive Left/Right Guidance - Provides visual and audible direction and distance information to guide you to the conductor.

Peak Mode – Provides a curtain display of the signal strength to locate the cable by maximum signal strength instead of Left/Right Guidance. This mode is useful in special applications and provides additional capability to the user.

Current Measurement - Doesn’t vary with depth, assists in positive line identification, and helps identify T’s and laterals, large faults and holidays.

Battery Level Display - Continuously displays remaining battery life and provides flashing low power alert.

Push Button Depth - Provides depth measurement in feet and inches (or in cm) in both active and passive modes.

Real-Time Continuous Gain Adjustment - Automatic gain continuously optimizes the sensitivity of the Receiver in a fully automatic way and eliminates the need for any user adjustment.

Manual Gain Control - Provides higher sensitivity in particularly tough locate situations. Dedicated gain up/down buttons provide maximum efficiency.

Simultaneous Peak and Null Display - Provides information on peak signal and centerline simultaneously.

Battery Saving Automatic Power Down - After five minutes of no activity, the Receiver shuts down to save battery life. Imminent shutdown is indicated by a warble tone. To prevent shutdown, push any button while the tone is warbling.

Depth Measurement to 20 Feet (6 m) - Depth measurement range is up to 20 feet (6 m) to provide information for deep locates.

RS232 Serial Communication Port - Provides data transfer capability for calibration and service.

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x